Getting Started

This is a Circuitpython driver library for the nRF24L01(+) transceiver.

Originally this code was a Micropython module written by Damien P. George & Peter Hinch which can still be found here

The Micropython source has since been rewritten to expose all the nRF24L01’s features and for Circuitpython compatible devices (including linux-based SoC computers like the Raspberry Pi). Modified by Brendan Doherty & Rhys Thomas.

• Authors: Damien P. George, Peter Hinch, Rhys Thomas, Brendan Doherty

Features currently supported

• Change the address’s length (can be 3 to 5 bytes long)

• Dynamically sized payloads (max 32 bytes each) or statically sized payloads

• Automatic responding acknowledgment (ACK) packets for verifying transmission success

• Append custom payloadsto the acknowledgment (ACK) packets for instant bi-directional communication

• Mark a single payload for no acknowledgment (ACK) from the receiving nRF24L01 (see ask_no_ack parameter for send() and write() functions)

• Invoke the “re-use the same payload” feature (for manually re-transmitting failed transmissions that remain in the TX FIFO buffer)

• Multiple payload transmissions with one function call (see documentation on the send() function and try out the Stream example)

• Context manager compatible for easily switching between different radio configurations using The with statement blocks (not available in rf24_lite.py version)

• Configure the interrupt (IRQ) pin to trigger (active low) on received, sent, and/or failed transmissions (these 3 events control 1 IRQ pin). There’s also virtual representations of these interrupt events available (see irq_dr, irq_ds, & irq_df attributes)

• Invoke sleep mode (AKA power down mode) for ultra-low current consumption

• cyclic redundancy checking (CRC) up to 2 bytes long

• Adjust the nRF24L01’s builtin automatic re-transmit feature’s parameters (arc: number of attempts, ard: delay between attempts)

• Adjust the nRF24L01’s frequency channel (2.4-2.525 GHz)

• Adjust the nRF24L01’s power amplifier level (0, -6, -12, or -18 dBm)

• Adjust the nRF24L01’s RF data rate (250kbps, 1Mbps, or 2Mbps)

• An nRF24L01 driven by this library can communicate with a nRF24L01 on an Arduino driven by the TMRh20 RF24 library. See the nrf24l01_2arduino_handling_data.py example.

• fake BLE module for sending BLE beacon advertisments from the nRF24L01 as outlined by Dmitry Grinberg in his write-up (including C source code).

• Multiceiver^TM mode (up to 6 TX nRF24L01 “talking” to 1 RX nRF24L01 simultaneously). See the Multiceiver Example

Dependencies

This driver depends on:

• Adafruit CircuitPython Firmware or the Adafruit_Blinka library for Linux SoC boards like Raspberry Pi

• Adafruit_CircuitPython_BusDevice (specifically the spi_device)

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Note

This library supports Python 3.7 or newer because the examples use the function time.monotonic_ns() which returns an arbitrary time “counter” as an int of nanoseconds. CircuitPython firmware also supports time.monotonic_ns().

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install circuitpython-nrf24l01

To install system-wide (this may be required in some cases):

sudo pip3 install circuitpython-nrf24l01

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install circuitpython-nrf24l01

Pinout

The nRF24L01 is controlled through SPI so there are 3 pins (SCK, MOSI, & MISO) that can only be connected to their counterparts on the MCU (microcontroller unit). The other 2 essential pins (CE & CSN) can be connected to any digital output pins. Lastly, the only optional pin on the nRf24L01 GPIOs is the IRQ (interrupt; a digital output that’s active when low) pin and is only connected to the MCU via a digital input pin during the interrupt example. The following pinout is used in the example codes of this library’s examples.

nRF2401	Raspberry Pi	ItsyBitsy M4
GND	GND	GND
VCC	3V	3.3V
CE	GPIO4	D4
CSN	GPIO5	D5
SCK	GPIO11 (SCK)	SCK
MOSI	GPIO10 (MOSI)	MOSI
MISO	GPIO9 (MISO)	MISO
IRQ	GPIO12	D12

Tip

User reports and personal experiences have improved results if there is a capacitor of 100 mirofarads [+ another optional 0.1 microfarads capacitor for added stability] connected in parrallel to the VCC and GND pins.

Using The Examples

See examples for testing certain features of this the library. The examples were developed and tested on both Raspberry Pi and ItsyBitsy M4. Pins have been hard coded in the examples for the corresponding device, so please adjust these accordingly to your circuitpython device if necessary.

For an interactive REPL

All examples can be imported from within an interactive python REPL.

1. Make sure the examples are located in the current working directory. On CircuitPython devices, this will be the root directory of the CIRCUITPY drive.

2. Import everything from desired the example. The following code snippet demonstrates running the Simple Test example

   >>> from nrf24l01_simple_test import *
   Which radio is this? Enter '0' or '1'. Defaults to '0'
       nRF24L01 Simple test.
       Run slave() on receiver
       Run master() on transmitter
   >>> master()
   Transmission successful! Time to Transmit: 6993.972 us. Sent: 0.0
   Transmission successful! Time to Transmit: 6563.277 us. Sent: 0.01
   Transmission successful! Time to Transmit: 6453.385 us. Sent: 0.02
   Transmission successful! Time to Transmit: 6338.29 us. Sent: 0.03
   Transmission successful! Time to Transmit: 6440.163 us. Sent: 0.04
   

For CircuitPython devices

1. Copy the examples to the root directory of the CIRCUITPY device.

2. Rename of the example file to main.py.

3. If the REPL is not already running, then the example should start automatically. If the REPL is already running in interactive mode, then press ctrl+d to do a soft reset, and the example should start automatically.

For CPython in Linux

1. Clone the library repository, then navigate to the reository’s example directory.

   git clone https://github.com/2bndy5/CircuitPython_nRF24L01.git
   cd CircuitPython_nRF24L01/examples
   

2. Run the example as a normal python program

   python3 nrf24l01_simple_test.py
   

What to purchase

See the store links on the sidebar or just google “nRF24L01+”. It is worth noting that you generally want to buy more than 1 as you need 2 for testing – 1 to send & 1 to receive and vise versa. This library has been tested on a cheaply bought 6 pack from Amazon.com, but don’t take Amazon or eBay for granted! There are other wireless transceivers that are NOT compatible with this library. For instance, the esp8266-01 (also sold in packs) is NOT compatible with this library, but looks very similar to the nRF24L01+ and could lead to an accidental purchase.

See also

Beware, there are also nrf24l01(+) clones and counterfeits that may not work the same.

Power Stability

If you’re not using a dedicated 3V regulator to supply power to the nRF24L01, then adding capcitor(s) (100 µF + an optional 0.1µF) in parrellel (& as close as possible) to the VCC and GND pins is highly recommended. Stablizing the power input provides significant performance increases. More finite details about the nRF24L01 are available from the datasheet (referenced here in the documentation as the nRF24L01+ Specification Sheet)

About the nRF24L01+PA+LNA modules

You may find variants of the nRF24L01 transceiver that are marketed as “nRF24L01+PA+LNA”. These modules are distinct in the fact that they come with a detachable (SMA-type) antenna. They employ seperate RFX24C01 IC with the antenna for enhanced Power Amplification (PA) and Low Noise Amplification (LNA) features. While they boast greater range with the same functionality, they are subject to a couple lesser known (and lesser advertised) drawbacks:

1. Stronger power source. Below is a chart of advertised current requirements that many MCU boards’ 3V regulators may not be able to provide (after supplying power to internal components).

   Specification	Value
   Emission mode current(peak)	115 mA
   Receive Mode current(peak)	45 mA
   Power-down mode current	4.2 µA

2. Needs shielding from electromagnetic interference. Shielding usually works best when it has a path to ground (GND pin), but this connection to the GND pin is not required.

See also the Testing nRF24L01+PA+LNA module

nRF24L01(+) clones and counterfeits

This library does not directly support clones/counterfeits as there is no way for the library to differentiate between an actual nRF24L01+ and a clone/counterfeit. To determine if your purchase is a counterfeit, please contact the retailer you purchased from (also reading this article and its links might help). The most notable clone is the Si24R1. I could not find the Si24R1 datasheet in english. Troubleshooting the SI24R1 may require replacing the onboard antenna with a wire. Furthermore, the Si24R1 has different power amplifier options as noted in the RF_PWR section (bits 0 through 2) of the RF_SETUP register (address 0x06) of the datasheet. While the options’ values differ from those identified by this library’s API, the underlying commands to configure those options are almost identical to the nRF24L01. The Si24R1 is also famous for not supporting auto_ack correctly because the designers “cloned” a typo from the 1^st version of the nRF24L01 (non-plus) datasheet into the Si24R1 firmware. Other known clones include the bk242x (also known as RFM7x).

See also

Read this article about using clones with missing capacitors (includes pictures).

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming. To contribute, all you need to do is fork this repository, develop your idea(s) and submit a pull request when stable. To initiate a discussion of idea(s), you need only open an issue on the aforementioned repository (doesn’t have to be a bug report).

Future Project Ideas/Additions

The following are only ideas; they are not currently supported by this circuitpython library.

• There’s a few blog posts by Nerd Ralph demonstrating how to use the nRF24L01 via 2 or 3 pins (uses custom bitbanging SPI functions and an external circuit involving a resistor and a capacitor)

• network linking layer, maybe something like TMRh20’s RF24Network

• implement the Gazelle-based protocol used by the BBC micro-bit (makecode.com’s radio blocks).

Sphinx documentation

Sphinx is used to build the documentation based on rST files and comments in the code. First, install dependencies (feel free to reuse the virtual environment from above):

python3 -m venv .env
source .env/bin/activate
pip install Sphinx sphinx-rtd-theme

Now, once you have the virtual environment activated:

cd docs
sphinx-build -E -W -b html . _build

This will output the documentation to docs/_build. Open the index.html in your browser to view them. It will also (due to -W) error out on any warning like the Github action, Build CI, does. This is a good way to locally verify it will pass.

Indices and tables

• Index

• Module Index

• Search Page